Eudora couple produces rescue airboats
For years, Cathy and Matthew Cain had a local reputation as the couple to call when emergency responders needed help with particular water emergencies.
"We responded quite a few times," Matthew said. "Even years ago, I'd get phone calls to go look for people because fire departments couldn't do it."
What the Cains had that emergency responders didn't was an airboat, or shallow-draft craft pushed by a rear-mounted propeller, which could easily navigate the Kaw too shallow for traditional craft.
Matthew started making airboats for his own recreational use on the Kansas River more than a decade ago. The Eudora couple's interest was such that he is president and she secretary of the Kaw Valley Air Boaters Association.
Those rescue calls eventually made Matthew wonder if there was an opportunity to make and market airboat rescue craft. With a little research, he learned available rescue airboats were little more than traditional recreation craft with a windshield stuck on the front and a canvas cabin hung behind the controls.
Two years ago, the Cains decided they could do better.
"The last couple of years has been a lot of trial and error before we arrived at a point we were ready to go into the open market." Matthew said. "We developed a lot of boats, but we weren't ready to go on the market with them."
The couple developed several models of airboats with polymer-coated aluminum hulls and reinforced with enough braces and structure to cut through icy rivers and lakes. Their boats also have fully enclosed heated aluminum cabins.
"All the comforts of home," Cathy said.
The enclosed cabin also protects their airboats from swamping in rough water, which is a problem with traditional craft, Matthew said.
The first order was from Kansas niversity Biological Survey near the start of the trial-and-error period in the fall of 2005. Jim Thorpe, a KU professor and senior scientist with Biological Survey, said the airboat would enter its second and most intensive summer of service this year.
"We use it for two purposes," he said. "One is when we are working on Plains rivers like the Kansas River with sand beds. The Arkansas and Platte, many parts of the rivers need an airboat to operate. We also use it on some sections of reservoirs, wetlands or any shallow environment.
"We're really happy with the boat. I think they are the best kind of airboat that you can get in the country by far."
The second order was for a larger Ambulance Master, which has room to carry and treat two patients. Also on the drawing board is a Fire Master that will be equipped to pump water on fires and a Dive Master for underwater searches.
The Grosse Ile, Mich., Fire Department ordered the first $160,000 Ambulance Master for use on the Detroit River and Lake Erie.
The Cains said they got the order after placing an advertisement in a fire and rescue trade magazine.
"They were looking for a rescue airboat, but weren't satisfied with what was out there," he said. "When they saw that advertisement, they decided this was what they wanted."
A Web site and word of mouth from a demonstration on Michigan's Saginaw River has also created interest. In the February 2006 demonstration, their airboat proved its superiority to rescue airboats with fiberglass or composite hulls that couldn't stand up to the punishment of breaking through ice or the effect of "ice channeling" when the parted ice presses in on both sides of the hull, Matthew said.
"There were about four inches of ice on the river," he said. "This boat broke the ice and survived the channeling.
"They were very impressed."
"So were we," Cathy said. "We'd never seen that much ice before."
That demonstration, Web site and advertisements they've placed have drummed up interest from fire departments and emergency medical services in the northern half United States and Canada, the couple said.
"We thought the military would be our big client, but it looks like it's going to be fire departments," Matthew said. "Since the ad appeared in the magazine, we've had about 700 requests for information."
Building an airboat strong enough to break through four inches of ice is a timely and labor-intensive process. The Cains said it takes them and employee Randy Canaan, De Soto, about 10 weeks to build a boat. They have jigs for the hull, cabin and propeller cage, but structural pieces that reinforce the hull all have to be hand crafted, they said.
"We don't want to go with a cookie-cutter type of thing," Cathy said. "We want to deliver a good product."
The term airboat sells the craft short. The powerful push from the ambulance's 572-cubic-inch, 620 horsepower motor allows the 4,000-pound craft to operate on ice, snow, wet sand and even pavement. It can move the boat over water at 50 mph, Matthew said.
"There's a hurricane force wind coming off the back of that thing, so you don't want to stand behind it," he said.
The boats are now built in a shop the couple leases from Dave Penny in De Soto's East Bottoms, but the Cains said they would have to relocate to a bigger facility in time. The uniqueness of their product has them optimistic even should others decide to copy their success.
"I figure we've got a head start in experience and design," Matthew said. "We've done a pretty good job of getting our name out there."